Project Description
Network camera with analogue interface
The BHNC3 camera is designed for professional surveillance as well as rear-view mirror applications.
The configurable active image area (Region of Interest) allows for retrospective adjustment of the camera.
The camera can be configured customer specifically via Ethernet.
Technical details
Features | |
---|---|
Image sensor | 1/3 inch CMOS sensor with 1Megapixel Superior low-light performance |
Ethernet | 10BASE-T / 100BASE-TX |
Video frame rate | Full resolution: 1280 x 960 @ 45fps Full frame rate: 60fps @1280 x 720 |
Digital video output (supported codecs) | H.264 (MPEG-4 Part 10) MJPEG |
Transmission protocol | RTP |
Analog video output | 2 times coaxial video output (75Ω), 720×576 pixel, PAL system |
Mirror function | Horizontal / Vertical |
Heating | Automatic / Manual |
Cooling | Passive |
Glass | Saphire glass, exchangeable |
Miscellaneous | High Dynamic Range Auto white balancing Auto exposure Excellent low-light performance |
Interfaces (arbitrary) | |
---|---|
Power supply camera | Customer-specific over pigtail |
Analog video out | Customer-specific over pigtail |
Heater ON | Customer-specific over pigtail |
Ethernet | Customer-specific over pigtail |
Power supply heating | Customer-specific over pigtail |
Power supply | |
---|---|
Input range | +12VDC .. +24VDC |
Maximum power consumption camera | 2W |
Maximum power consumption heater | 60W |
Mechanical properties | |
---|---|
Housing | Aluminium case |
Protection class | IP67, front and rear |
Engineering standards | |
---|---|
General | EN50155 |
EMC | EN50121-3-2 |
Shock and vibration | EN61373 Category 1 Class B |
Environment | |
---|---|
Operating Temperature | -40°C … +70°C Class TX |
Storage temperature | -40°C … +85°C |